|
Product Details:
|
| Product Name: | Polaris Series | Working Voltage: | 100-277 VAC,141-392 VDC |
|---|---|---|---|
| Watts: | 6W(Normal), 0.5W(Emergency) | Area Classification: | Group II Zone 1 & 21 And 2 & 22 |
| Lifespan: | >50,000 Hours | Frequency: | 50/60Hz |
| Power Factor: | ＞0.98 | Exposed Fastener: | Stainless Steel |
| High Light: | IP54 Explosion Proof Emergency Light,IP54 flameproof emergency light |
||
Explosion Proof Emergency Light, EXIT light, 3 hours battery backup, IP54
Explosion Proof Emergency Light, EXIT light, 3 hours battery backup, IP54
Highlight:Explosion Proof Emergency Light, EXIT light, Zone 1
Features And Benefits:
1. Robust aluminium housing and strong tempered glass.
2 .Green letter and white letter for optional.
3. Three hours battery backup.
4. Long life span and low maintenance.
5. Pendant, wall, and end bracket mounts provide universal installation options.
Product Important Information:
| Type Of Protection | Ex mb ib, |
| Protection Standards |
(IEC)EN 60079-0, (IEC)EN 60079-11, (IEC)EN 60079-18,(IEC)EN 60079-28, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3, EN 60598-1, EN 60598-2-5, EN 62031, EN 62493, IEC 62321-4, IEC 62321-5, IEC 62321-6, IEC 62321-7-1, IEC 62321-7-2, IEC 62321-8 |
| Area Classfiction | Zone 1 & Zone 2 Areas to (IEC)EN 60079-10-1 |
| Installation | (IEC)EN 60079-14 |
| Certificate | ECM 19 ATEX-B SU43 |
| Equipment Coding | Ex mb ib op is IIC T6 Gb |
| Temperature Class | -20℃ ≤ Ta ≤ +55℃ |
| ATEx Coding |  II 2 G |
| Ingress Protection | IP54 (IEC)EN 60529 |
| Cable entry | M20*1.5,M25*1.5,3/4 NPT |
| CE Mark |
The CE marking of this product applies to EU directives 2014/35/EU, 2014/30/EU, 2012/19/EU , 2011/65/EU and 2014/34/EU respectively. The Equipment is declared to meet the provisions of the ATEX directive(2014/34/EU)by reason of the EC Type Examination and compliance with the Essential Health and Safety Requirements |
Applications:
Can be widely used in any building or enclosed area where people work where illuminated exit signs are required
1. In locations deemed hazardous due to the presence of flammable vapors or gases, or combustible dusts
2. In any building or enclosed area where people work-where illuminated exit signs are required
3. To provide distinct, highly visible exit marking
4. To indicate the direction of travel to exits
5. Locations requiring continuous and consistent light .levels
Ordering information:
| P/N | Operating Voltage(V) | Light Color | Exit Sign Designation | Temp. Classification |
|
Ex-KPSEW-GE-ON-E |
100-277 AC (141-392 DC) |
White |
|
T6 |
|
Ex-KPSEW-GHL-ON-E |
|
|||
| Ex-KPSEW-GHR-ON-E | |
|||
|
Ex-KPSEW-GHLR-ON-E |
|
|||
|
Ex-KPSEG-E-ON-E |
Green |
|
||
|
Ex-KPSEG-HL-ON-E |
|
|||
|
Ex-KPSEG-HR-ON-E |
|
|||
|
Ex-KPSEG-HLR-ON-E |
|
Contact Person: sales
Tel: +8615219463112
